Join
Help
 
  HOME | 

 


SFP/GBIC/XFP/X2/XENPAK Transceivers
Fiber Optic Connector
Fiber Optic Adaptor
Fiber Optic Attenuator
Ethernet Media Converter Series
New Products

 
Inquery Basket View Inquiry Basket
Total： 0   Items
----------------------------------
Order Basket View Order
Total：0   Items
Email
Pwd
Password Forgotten
 
 
 
 
 
<<BACK
Item No: EMC031
Product Name: KY-SG03-SFP
Weight(Kg): 0
Compatibility: KY-SG03-SFP
Base Data : Technical Specifications
The Multiplexer conforms to the following standards:
 Standerds: IEEE 802.3AB 1000Base-T
1000Base-SX/LX/LH
 Fiber Cable:
Molti-mode: 50/125，62.5/125µm
Single-mode: 9/125µm.
 Data Transfer Rate:
2.5Gbps for SFP1, 1Gbps for SFP2 and SFP3.
 LED Indicators:
Power, P1 2.5G, P1 Link/Act, P2 Link/Act,
P3 Link/Act,
 Power Requirement: 220V(110-245V)AC，50Hz
 Dimensions: 26×70×93mm（H×W×D）
Work Circumstance: Ambient Temperature: 0 ～ 50℃
 Humidity: 5% ～ 90%
 

 
 
Packing Explain:



Spec Explain:

Gigabit Ethernet Multiplexer
（2×1.25G to 2.5G）
User’s Manual

1．Overview
The Gigabit Ethernet Multiplexer aggregates 2 port Gigabit Ethernet into 1 port 2.5G uplink, reducing the conversion CAPEX and increasing the fiber utilization effectively. The multiplexer can be used either in point-to-point topology fuctioning as a media converter for transporting two Gigabit Ethernet services over one fiber or in CWDM system working as a wavelength converter for extending the system’s transmits- sion capacity doubly. The multiplexer is equipped with three SFP-based ports: SFP1 is 2.5G uplink port, SFP2 and SFP3 are Gigabit Ethernet service ports.The multiplexer must be used in couples.

2. Checklist
Before you installing the Multiplexer, verify that the package contains the following：
1． The Gigabit Ethernet Multiplexer.
2． AC/DC Power Adapter.
3． This User’s Manual.
Piease notify your sales representative immediately if any of the aforementioned items is missing or damaged.

3. LED Description
There are five LED At Front of Multiplexer:

2.5G Lit when SFP1 speed is 2.5Gbps
P1 Lit when SFP1 connection is good.
Blinks when SFP1 data is transmitting.
P2 Lit when SFP2 connection is good.
Blinks when SFP1 data is transmitting.
P3 Lit when SFP3 connection is good.
Blinks when SFP3 data is transmitting.
PWR Lit when +5V power is coming up.

4. Installing Gigabit Ethernet Multiplexer
The multiplexer must be used in couples.
1. Attach one 2.5G SFP module to SFP1 Cage on the Multiplexer. Attach two 1.25G SFP modules to SFP2 and SFP3 Cage on the Multiplexer.
2. Link fiber from the SFP1 on one Multiplexer with SFP1 on another Multiplexer. It can link through CWDM system.
3. Link fiber from the SFP2 and SFP3 on the Multiplexer to Gigabit Ethernet Service.
Note: SFP2 on one Multiplexer link pass only with SFP2 on another Multiplexer. SFP3 on one Multiplexer link pass only with SFP3 on another Multiplexer.
4. Connect the power cord to the Multiplexer and check that the Power LED lights up. The Px
LEDs will light when all the cable connections satisfactory.
COPYRIGHT[C] 2003   粤ICP备19147452号  www.kyopto.com   ALL RIGHTS RESERVES.  
 International Direct Tel: 0086 755 84876186         E-mail: info@kyopto.com